
Recommended Tools
|
|||||||||
How to Stain:Shake a bottle of Woodburst™ thoroughly until all sediment is mixed. Pour amount needed into paper cup or other container.
|
Extender Uses:
Solvent Uses:
Tinting
with Woodburst™
|
||||||||
![]() |
Grab center of paper towel or rag and pull the ends together. Dip point into cup and apply stain generously to surface. | ||||||||
| Wipe excess with a dry part of the towel. | ![]() |
||||||||
|
Dries in 24 to 48 hours and can be finished with traditional
finishes. If using wax finish, let dry for 72 hours.
|
|||||||||
Application Options
Aging
White
|
![]() |
DryingJapan dryer can be used to speed up curing of stain. Use an eyedropper to measure approx. 25 drops (1% by wt.) per 2-ounce quantity of Woodburst™. Mix only the amount you plan to use. |
|||||||
|
RECOMMENDATION: When doing large areas, it is suggested that you mix all color to be used in one container to guarantee exact color consistency. Easy Cleanup:You can wash your hands with soap and water, waterless cleaner or baby oil. Most of the colors wash off fairly easily. Blue, green and black are more difficult. Due to the high flash point, this product is much safer to work with than other oil-based stains. If you use paper towels or rags, when the solvent has evaporated you may dispose of them as regular trash. |
|||||||||